For desktops there are PCMCIA slots for ISA and PCI bus available.
Source: http://www.lapshop.de
With the command cardctl ident
you may get information about your card. Put this information into /etc/pcmcia/config.opts if necessary. But this may not be enough to get the card to work, but works sometimes for no-name network cards or modem cards. If you get a card to work or have written a new driver please don't forget to announce this to the developer of the PCMCIA-CS package David Hinds . Look the current issue of his file SUPPORTED.CARDS to get information about supported cards.
Since there are not all cards mentioned I have set up a page PCMCIA Cards "Unofficially" Supported by Linux .
SmartCard reader, see Project Muscle - Movement for the Use of Smart Cards in a Linux Environment
The Linux Memory Technology Device project aims to provide a unified subsystem for handling RAM and Flash cards (Memory Technology Devices). It is intended to be compatible with the Linux PCMCIA code, to prevent duplication of code and effort, yet its main target is small embedded systems, so it will be possible to compile the drivers into the kernel for use as a root filesystem, and a close eye will be kept on the memory footprint.
Survey about small mobile printers:
AFAIK only the HP and the BJC-80 machine have an infrared port. Pay attention to the supplied voltage of the power supply if you plan to travel abroad. Source: http://www.lapshop.de
When travelling abroad you might consider to take a set of different power and phone plugs with you. Also, it's useful if you can change the input voltage of the power supply, for instance from 110V in the US to 220V in Germany. There also power supplies for 12V batteries from cars.
Some models of power plugs:
____ / () \ _ _ _ frontal view: |() ()| (_)=(_) (_) N.N. ------ abbrevation.: C13 C8 ?? PS/2 symbol......: ?? ?? -O)- N.N.
You probably wonder, why I include this topic here. But shortly after using my COMPAQ Armada 1592DT I recognized that the rear side of the machine (where the ports are arranged) was slightly damaged. Though I have taken much care when transporting the laptop, this was caused by putting the bag on the floor. It seems that the laptop has so much weight, that it bounces inside the bag on its own rear side. So I decided to put a soft pad into the bag before loading the laptop. A good bag is highly recommended if you take your laptop on trips, or take it home every night.
Laptops computers are frequently demolished in their carrying bag. The two main causes of demolition are poking the LC display and banging the edges.A good case has very stiff sides to spread out pokes, and lots of energy-absorbent padding around the edges to help when you whack it on the door jamb.Few cases actually have either of these features.
More laptops are lost to theft than damage, so camouflage is a wise too. Emerson, Tom # El Monte <TOMEMERSON@ms.globalpay.com> wrote: "I use for a laptop travelling bag: a Pyrex casserole carrier bag. Yup, you might think it odd to use a casserole bag for a laptop, but it turns out it has several advantages: