Home Index Search Links About us
[LinuxFocus Image]
[Navegation Bar]
  News   Archives   Companies   Tips

The StarOffice Suite
Making Presentations

by


Introduction

Installation

Global
features

Presentation
Design

"Things"
you can do

Export to HTML

Conclusions

This article presents an overview of the software suite StarOffice 4.0 . The functionality provided by StarOffice is too vast to explore in a single article. In this first part we will review in more detail the presentation maker application (similar of MS PowerPoint). In future articles we will examine other applications: Word Processor, Spreadsheet, Web Navigator, etc.


Introduction

Although it sounds very typical, we can fairly describe StarOffice 4.0 as:

" An integral solution for the tasks of any office environment "

More specifically, StarOffice includes the following applications (I try to not forget any): word processor, spreadsheet, database, presentation editor, mail program, ftp client, news program, web browser, HTML editor, and graphic editor.

Before describing the packages it is important to say a few words about the license. It is not distributed under GPL and sources are not available. Until now StarDivision, the maker of StarOffice, has been releasing BETA versions that can be distributed freely. Apparently they intend to continue this way until they finally produce a final version that is NON-COMMERCIAL FOR PERSONAL USE ONLY and that will be available through Caldera and StarDivision.

According to the deal signed by StarDivision and Caldera the latter will have rights over the commercialization and distribution of StarOffice. From now on only these two companies can distribute StarOffice. If anyone wants to include StarOffice in other distributions, they must first contact Caldera. This is a big short-coming and the reason why most of the common Linux ftp sites do not carry StarOffice.

From my point of view, StarOffice is going to set a turning point in the history of Linux. Until now, Linux has been restricted to a great extent to R & D groups in universities and companies (besides the huge number of unconditional hackers) mainly because of two factors: (1) Linux demands more computer science knowledge from its users than other operating systems; and (2) There has been a lack of office oriented applications for Linux, and I am refering to WYSIWYG editors, spreadsheets, etc.. Recent distributions have reduced greatly the management and installation load on users and this is a great improvement. Although since a long time ago there are very good editors for Linux (Emacs, LyX, Applix, etc), none of them reaches the height of programs like MS Word (no matter how painful it might be to recognize it). StarOffice has changed the situation completely, its performance and look-and-feel reach the level of the omnipresent Ms Office. As someone already said: "Bill Gates will have nightmares the day he learns about StarOffice".

One interesting characteristic of StarOffice is that it is single program and all applications are executed within the window of this unique program. In fact, StarDivision has created a full windows environment for their program that is executed within the only frame opened by StarOffice. This strategy makes the application easier to maintain and port to all sort of platforms: OS/2, Windows, Linux, Sun and other UNIX. Only 20% of the code is platform dependent.

StarOffice designers know very well that the look-and-feel of MS is the great winner in all areas of office software, and that the menu organization and key shortcuts known by everyone have been established as the de facto standard. In view of the current situation they decided to keep things simple to themselves and use an installation process, menu organization and user interface that is quite "standard". This strong similarity to windoze applications can in fact be annoying for veteran Linux users.

I am writing this article with StarOffice. The following figure is a snap shot of the text editor:

Graphic1



Installation

The installation is entirely automatic. Just follow these simple steps: download binary distribution "so40_lnx_01.tgz" from http://www.stardivision.com, decompress this file in a temp directory, that we will generate the directory "Office_Install". Next run the script "setup".

Before starting with the installation, you should make sure that you have a libc version 5.4.22 or later in your system. In other words, you should have the file /lib/libc.so.5.4.22. If your system lacks of this library it can be downloaded from sunsite. If you have Red Hat version 5.0 you also will have problems, since they already use the next version library, libc6 and the libc.so.5.3. It is my understanding there is already a patch to make the distribution compatible with applications that use libc.so.5.4, but in any case, let me give you an always-successful trick:

  • copy the library libc.so.5.4.22 (superior) in the directory /lib, you can get this one in anywhere, from the directory of gcc in any sunsite, to any distribution Slackware or Debian;
  • execute ldconfig;
  • run the setup, as follows (export LD_LIBRARY_PATH=/lib.old:$LD_LIBRARY_PATH; setup)

Brackets are necessary. It forces the setup program to believe it is dealing with an old style library system.

There are two possible styles of installation. The suite could be installed for personal use or system wide use. If you wish the latter type of installation then when running the setup program use the option /net, and install it in a direcoty where all users have access permissions, say /opt. This installation takes about 114 Mb of disk space. Then any user who wants to use it has to run the program as /opt/Office40/bin/setup and choose the option "Install from CD or net". Installation of each user takesabout 12 Mb.

Finally add to the PATH variable, the directory where we have the program files:

export PATH=$PATH:$HOME/Office40/bin.

StarOffice makes extensive use of the X server capacities, therefore is important to have all font sources installed, otherwise if some fonts are not found they will be substituted by default for other fonts of different size and generally worse appearance. The office suite itself brings a number of fonts for your X server. The following commands inform your X server where to locate the fonts StarOffice likes:

$ xset fp+ $HOME/Office40/fonts/75dpi
$ xset fp+ $HOME/Office40/fonts/type1
The executable file that launches the suite is soffice. If your computer has less than 32 Mb or if you have many programs running, be patient, it can take a while to get started. As during the installation, if you have problems with the libraries, try executing:
$ (export LD_LIBRARY_PATH=/lib.old:$LD_LIBRARY_PATH; soffice)

Graphic2


Global features

On-line help

All programs included in the suite are designed to provide help Windows style (that is, answers to all sorts of questions no matter how foolish). All dialogue windows have a Help button. Version 4.0 does not carry the help files, therefore this help buttons are not really functional.

Each program has its corresponding tutorial in this version. They are not very exhaustive, perhaps the development team did not have enough time to write more complete tutorials. On the other hand, the information provided is really good. They are the kind of manuals you can read while working on your documents.

Besides the typical hints, StarOffice has some really useful extended tips. They are activated from the menu Help->Extended_Tips

Contextual menu

If we select some "object", we can pull down a menu by clicking the right button. This menu contains the most useful functions that you can execute on the object selected. The menu bars also adapt to the type of object selected. For example, if we select a text block, then the object toolbar has the following appearance:

Barra de texto

But if we select a graphic object, then the toolbar looks like this:

[Barra de graficos]

Several simultaneous applications

We can have several applications running simultaneously. Each document can be completely different. For example, we can be editing text in a window, at the same time as in other window we surf the net and in other window we have a spreadsheet in progress. For instance, right now I have on my screen the presentation I am preparing for this article and the text file you are reading right now.

OLE for Linux

Some readers may not be familiar with OLE for Windows. OLE is the acronym for Object Linking and Embedding, is a protocol for linking components in a graphic environment. In other words, we can insert documents created with one application into another. As I mentioned earlier, StarOffice is composed of many applications and thanks to this technology (implemented entirely by StarOffice creators because it was absent from Linux) we can paste in our presentation: a spreadsheet or a table from the text editor.

Ortographic correction and synonyms

Star-Office provides a powerful check-speller. It can run in after-written mode, in which case a window appears with the words not found in the dictionary or believed to be misspelled together with a list of suggestions. The check-speller also has an online mode and as you type text, words are looked up in the dictionary and underlined in red if they require correction. In this last mode the menu bar offers possible suggestions. Both modes are unbelievably fast.

The only problem I see for the moment is that only English and German dictionaries are supported. However according to my information a multilingual version will be released soon.

Another interesting tool is the synonym search engine (quite useful for those of us who need to write in a second language ).

[Thesaurus]

It's impossible to explore all features of StarOffice in a single article. Therefore I will begin this sequence with one of the applications that was the most necessary for me under Linux: the presentation editor, the PowerPoint of Linux.

Presentation Design

Presentation design programs are half way between text editors (Word, LyX, etc) and vector graphics editors (CorelDraw, xfig, etc.). With a presentation editor we can create presentations of several types: presentations on computer screen, presentations on slides (either black & white or colour ), and presentations on paper.

A presentation consists of a number of independent pages; which means that any text or figure that overflows the page is lost, no new pages are generated. The user has total control on the distribution and location of objects on the page. Normally we have a wide range of predefined objects available (geometric figures, icons, text boxes, and more).

The presentation editor is named Presentation, on the other hand this is not very relevant since we can only access it through soffice window.

There are two ways to create a presentation: beginning from a blank presentation, or making use of the assistant --Auto Pilot--. In the latter case select File->New->Presentation , follow Auto Pilot windows and at the end you will have a set of slide templates appropriate to your selection (very similar to MicroSoft's PowerPoint).

[Autopilot]
[Outline]
[WorkArea]

Now it is time to fill the templates suggested by the Auto Pilot and add any further slides necessary for our presentation. There are several work modes:

  • Slide: This is the normal mode. All operations are performed in WYSIWYG mode. We can work one page at a time.
  • Background: in this mode the user can design the background for all the slides.
  • Layer: Each slide is divided into several layers. This makes easier to to work on slides with numerous objects.
  • Outline Overview: Shows the text contained in all slides, giving us a global perspective of the presentation's structure.
  • Notes view: We can prepare, at the same time as we create the slides, remainder notes for the presentation. Notes and the slide's content are viewed simultaneously.
  • Short view: Lets you view a large number of slides at a time (as many as fit into the screen). This mode is helpful to gain a global perspective on the final aspect of the presentation.

" Things " you can do

What makes a presentation design tool valuable in my view is not the number of gadgets and new features it has but how friendly and automated it is to the user.

99% of all slides we write will have a very similar appearance: a title and then likely a list of text items. This task is very common thus having a simple mechanism to execute them would be a nice feature. Presentation allows us to pick a slide structure from a menu of possible common structures, and any slide structure can be modified at any time.


Figures with text

Most presentations may not be limited to a sequence of text slides. Often we want to arrange text in space to explain concepts and relationships, perhaps using rectangles, arrows and other geometric objects. Writing text within a geometrical object is an indispensable task in presentation design. Presentation makes available to us the usual rectangles (with or without rounded corners), ellipses, etc.. Complex 2D geometrical objects are not available, as in PowerPoint, but these are not used often. If for any reason they were necessary for a presentation you would have to construct them using the lines and polygon tool.

All attributes of a figure can be easily changed either from the toolbar or from the contextual menu.

Writing text inside a figure is very simple, simply click twice on the figure.

3D figures

A number of basic 3D figures are also available and they can be modify by many parameters with amazing results


Lines

Lines are indispensable for establishing relations between objects and for calling the attention of spectators. We have many types of lines, from bared lines, through lines with arrow-end and CAD design lines for measuring distances.

Objects can be linked using connectors. Connectors are a special type of line as well, when two objects are linked by connector and one of the objects is moved, the connector transforms itself while still keeping the two objects linked. There are various types of termination icons for these lines and on both extremes: squares, circles, arrow and either filled or empty.


Graphs

We can insert any type of bitmap graph: <../../common/May1998/tt.jpg, bmp, gif, png, tif, etc. From this moment the graph can be treated like any other object: We can move it, modify it, etc. StarOffice has a gallery of images available.

Animations

Now we come to the most spectacular features. If our presentation will be shown through a video projector then we can still use the program Presentation. In this scenario the program takes total control over the X server and we can pass slides by simply clicking the mouse button (or automatically using a timer). The video output of the computer should be connected to the video input of the projector, then click the button "Slide Show" and switch off the lights.

We can make the objects in our presentation move and interact in predetermined ways (Tools-> Effects). During the creation of the presentation one can specify how every object should appear and disappear.

The transition from one slide to the next is controlable by Tools->Slide_Transition. There are numerous types of transition available. Surely we can keep people from sleeping during our presentation!. In Layout View mode we can see very rapidly the transition effect from slide to slide

But movement not is the only thing we can do, we can also create sound.

One more possibility is to create animated gif files and include them into presentations.

We can create them from the window Tools->Animation. Though I have to say that in the actual version I hadn't be able to create one animated gif, since it seems that some bugs exist. Anyway we can use an animated gif created from another program.

OLE objects

Earlier we already mentioned that documents created by other StarOffice application can be inserted into a presentation. Similarly we can also paste the slides made into other documents.

Export to HTML

It sometimes happens that we want to make accessible from the Internet a presentation we created for a conference or seminar, this implies transforming our compositions into HTML format. StarOffice gives us the option of exporting HTML files. When exporting the presentation to HTML, StarOffice generates a first page index with the title and all the slides, and two files for every slide. One of the files is a little HTML page that contains only one image of the slide in <../../common/May1998/tt.jpg format and links forward, backward, and index page, and the other file is a <../../common/May1998/tt.jpg file of the slide.

The HTML pages created with this process do not support any type of animation. Click the following image for seeing the result of a presentation exported to HTML:

Conclusions

A tremendous amount of work has been done ehind the scenes in this program. If we take into account the size of the enterprise that has created StarOffice, the number of programmers, and the time employed to make it, we can affirm without a doubt that Microsoft does not have any idea about on how to write software. If StarDivision keeps with this rhythm, in less than a year, StarOffice will be, with large margin, the work environment most used in the Linux world, and with great expectations in the Windows world.

Translated by & Miguel Angel Sepulveda

© 1998 Ismael Ripoll
The website is maintained by .